Install SATA Drive
However, if your computer doesn’t detect the new hard drive by default, you may be able to fix this in the BIOS. Yes No Not Helpful 3 Helpful 2 What do I do when my hard drive has been damaged? Tips If replacing a previously installed SATA HDD, there's no reason to disconnect the SATA data cable from the SATA port on the motherboard. Seagate does not endorse or accept any responsibility for the content, or use, of any such web sites. http://secondsolution.net/hard-drive/install-new-sata-drive.php
Seagate references third parties and third party products as an informational service only, it is not an endorsement or recommendation - implied or otherwise - of any of the listed companies. This will help keep you grounded. If you are upgrading or replacing a hard drive, you should see one already installed. 4 Disconnect the old hard drive (if replacing). Flag as duplicate Thanks! http://www.wikihow.com/Install-a-SATA-Drive
How To Connect Sata Hard Drive To Motherboard
Turn off the power switch on the back of the case and remove the side panel. Before you begin working on the interior of your computer, make sure you discharge any electrostatic charge you may have. IDE Drives are connected via an IDE cable, which is wide and flat.
If necessary install a SATA PCI card. 3. Here's how to… Need to upgrade your storage? Sprache: Deutsch Herkunft der Inhalte: Deutschland Eingeschränkter Modus: Aus Verlauf Hilfe Wird geladen... How To Install A Hard Drive In A Laptop SATA cables can be connected in either direction. /images/thumb/6/65/Install-a-Hard-Drive-Step-8-Version-2.jpg/550px-Install-a-Hard-Drive-Step-8-Version-2.jpg /images/thumb/6/65/Install-a-Hard-Drive-Step-8-Version-2.jpg/300px-Install-a-Hard-Drive-Step-8-Version-2.jpg /5/51/Install a Hard Drive Step 8.360p.mp4 If you are connecting your primary hard drive, the SATA cable should be plugged into
If the hard drive is loose, it can rattle and cause more noise and lead to physical damage. Sata Interface Cable This sucks. Once you’ve placed the hard drive in the housing, press it firmly into the connectors. http://www.pcworld.com/article/131231/how-to-install-a-new-hard-drive-in-your-desktop-pc.html Reply Calvin December 31, 2015 at 6:48 am Not sure why my motherboard doesn't recognize the sata ports for these 2 hard drives I'm installing.
Show More Installing an internal hard drive is one of the more Sata Hard Drive Power Cable We don't recommend doing the same if you happen to have a 2.5-inch mechanical drive. The location varies from laptop to laptop, but generally it will be located behind a panel on the underside of the laptop. If you are adding a new drive, you will need to connect the data cable to a SATA port on the motherboard (if you are replacing and old drive, the data
Sata Interface Cable
If you are adding storage to your existing configuration, you should leave the original hard drive installed where it is and skip down to Step 5. http://www.makeuseof.com/tag/5-install-sata-hard-drive/ Secure the drive into the drive bay by inserting two screws into each side of the hard drive through the corresponding holes in the drive bay. How To Connect Sata Hard Drive To Motherboard You can use any available SATA slot. 6Close your computer case and turn on the power.When Windows 7 comes back up, it identifies the SATA drive and automatically installs the drivers. How To Connect Hard Drive To Motherboard The SATA power connector is depicted in the following image.
Method 2 Installing a Desktop SATA Optical Drive 1 Power down your computer. his comment is here Many cases will require you to remove both panels in order to secure the hard drive, though some have removable housings. 2 Ground yourself. Check your machine’s documentation on how to access the BIOS settings. Usually, you can pull a piece of ribbon to pop the hard drive out of the connectors. Install New Hard Drive Windows 7
Turn of the power switch on the back of the power supply, but leave the cable plugged in if possible. I like to use SATA cables with right-angle connectors on the drive side, provided there is adequate clearance between any drives in the system. In mainstream cases, drive connectors will typically point to the rear. http://secondsolution.net/hard-drive/install-sata-drive-with-machine-still-on.php You will need to remove both side panels on many older cases and some newer ones in order to properly secure the drive. 2 Ground yourself.
Follow one of the guides below for detailed instructions on reinstalling your specific operating system: Install Windows 7. How To Connect Sata Hard Drive To Usb Anzeige Autoplay Wenn Autoplay aktiviert ist, wird die Wiedergabe automatisch mit einem der aktuellen Videovorschläge fortgesetzt. If the power supply is older, it may not have any SATA power connectors.
If you are adding a new drive, you'll need to format the drive before you can use it.
Connector on Motherboard If your computer is not the latest model and initially came with an IDE hard drive, the motherboard might not provide a SATA connector. Follow one of the guides below for more detailed instructions: Install Windows 7. Placement and orientation of the cages or bays will vary from case to case. How To Install A Second Hard Drive Connect the data cable to the smaller SATA port on the hard drive.
Wird geladen... Materials Needed:- Phillips screwdriver- mounting screw (four pieces)- Serial ATA interface cable- Serial ATA-compatible adapter or power cable- motherboard with Serial ATA host adapter or connector- PCI slot Serial ATA adapter- You should also find a list of identified hardware and how they are connected. navigate here If you are removing an old hard drive, make sure all of the cables are disconnected from both the motherboard and the power supply.
Most laptops only have one hard drive slot, so if you replace your hard drive you will lose access to all of your old data. Once the hard drive is secured and connected, close up your computer and power it back on. Once the hard drive has been inserted, use the screws that came with it to secure the hard drive in the housing. Connect the hard drives with SATA Once the drive is mounted, connecting it to your system is quick and easy.
Simply solves for newbies :) but my problem is the 4 pin molex power cable doesn't fit to my hdd : Reply jeanjean March 20, 2011 at 10:35 am what about As long as you don’t force it, there’s really no way to mess it up. If you are replacing the primary drive or building a new computer, you will need to install your operating system. The SATA power cable from your PSU, like the SATA data cable, is keyed to fit onto the drive one-way.
The location will vary depending on the case, but it can typically be found beneath the optical drive bay. Browse more how to's How to Install a SATA Drive How to Install a Satellite Dish How to Install a Satellite Radio to a Computer How to Install a Second Hard The method will vary depending on your laptop model. Related: Components Hard Drives Storage Hardware Marco Chiappetta is the managing editor at HotHardware.Com and a freelance writer for a handful of tech-centric publications.
If it’s a SATA drive, double-check whether another SATA connector is available on the motherboard, given you want to keep the old hard drive installed. If you are adding storage to your existing configuration, you should leave the original hard drive installed where it is and skip down to Step 5. Tighten the screws to a firm tightness, but don’t overtighten as that may cause damage as well. 8 Connect a SATA hard drive to the motherboard. Troubleshooting If your drive is not working properly, please visit the SATA Hard Drive Troubleshooting A great first step is to download SeaTools diagnostic software. REFERENCE TO THIRD PARTIES AND