Home > Hard Drive > Installation Of SATA Drive Help

Installation Of SATA Drive Help


Once your drive is mounted and it's not going anywhere, you need to plug in the power and data. Does Scandisk find the drive defect-free? Tips If replacing a previously installed SATA HDD, there's no reason to disconnect the SATA data cable from the SATA port on the motherboard. The cable can only be inserted in one direction, so don’t force it. Check This Out

In either case, you can do it yourself instead of taking your computer into a repair shop. Attach the interface and power cables to the drive. 3. Click Next, and check that Primary Partition is selected; click Next again, to the Specify Partition Size screen (don't change the partition size in the "Partition size in MB" field); and Secure the hard drive with any screws or clips that you removed to get the old one out. 6 Close up the laptop. why not try these out

How To Connect Sata Hard Drive To Motherboard

Secondary drives should be connected to the next available SATA channel. 9 Connect a PATA (IDE) hard drive to the motherboard. EditRelated wikiHows How to Install and Update Drivers in Your PC How to Change a Computer Hard Drive Disk How to Add an Extra Hard Drive How to Have More Than Wenn du bei YouTube angemeldet bist, kannst du dieses Video zu einer Playlist hinzufügen.

Seagate makes no warranty - implied or otherwise - regarding the performance or reliability of these companies or products. Thanks for voting! Transkript Das interaktive Transkript konnte nicht geladen werden. How To Connect Hard Drive To Motherboard Wird geladen...

If you already have a SATA drive installed, follow its power cable (the wider of the two connectors) to see if an unused power-supply lead with the same connector is nearby. Install New Hard Drive Windows 7 Once the hard drive has been inserted, use the screws that came with it to secure the hard drive in the housing. Depending on the laptop, you may have to remove a screw or two before you can remove the hard drive. http://www.pcworld.com/article/131231/how-to-install-a-new-hard-drive-in-your-desktop-pc.html You may have to format the drive for use first, but Windows will prompt you to do so when you boot up the first time.

The shape of the connector makes no difference in performance. How To Install A Second Hard Drive Why does my computer hang on startup? If your system does not have a Serial ATA connector on the motherboard, you must purchase a Serial ATA host adapter that is compatible with your computer and operating system and What You Need: A Phillips screwdriver and four 6-32 UNC drive mounting screws.

Install New Hard Drive Windows 7

Do not disassemble the drive. To comment on this article and other PCWorld content, visit our Facebook page or our Twitter feed. How To Connect Sata Hard Drive To Motherboard How to build a PC Previous Next How to build a PC: A step-by-step, comprehensive guide How to avoid common PC building mistakes How to install (or replace) a case fan How To Install A Hard Drive In A Laptop Open the case using the thumbscrews (or a screwdriver if necessary).

Verify that your system is Serial ATA compatible. his comment is here Does the computer recognize the drive? Type fdisk/status to verify that your hard drive is present and recognized by the system. 4. If the power cable does not fit easily, check to make sure that it is not upside down. Sata Interface Cable

Sorry There was an error emailing this page. Otherwise, performance may be constrained. While the computer restarts, run the system setup program (sometimes called BIOS or CMOS setup). http://secondsolution.net/hard-drive/install-new-sata-drive.php The  SATA power cable from your PSU, like the SATA data cable, is keyed to fit onto the drive one-way.

EDIT Edit this Article Home » Categories » Computers and Electronics » Hardware » Internal Components » Hard Drives ArticleEditDiscuss Edit ArticlewikiHow to Install a Hard Drive Two Methods:Desktop Hard DriveLaptop How To Connect Sata Hard Drive To Usb However, the word 'need' is misleading, as you can use a lot of different hard drives in some laptops. Refer to your computer system documentation to see if your system supports Serial ATA on the motherboard and to locate the Serial ATA connector.

This does not affect drive performance or capacity.   Microsoft Operating System Installation Instructions For detailed information about installing a Microsoft operating system on your new Seagate drive, refer to the

Ensure that anything you need is properly backed up, and that you have your operating system installation discs handy to install the operating system after the new drive is installed. 2 Some cases come with tool-less brackets that make mounting hard drives really easy. A spinning drive produces a faint whine and clicking noise. Install New Hard Drive Windows 10 Make sure you plug into a SATA 6Gbps/SATA 3.0 port if you're installing a solid state drive.

SATA hard drives are the same size and shape as EIDE hard drives and are installed in exactly the same way with one big difference: one SATA port connects to one Tighten the screws to a firm tightness, but don’t overtighten as that may cause damage as well. 8 Connect a SATA hard drive to the motherboard. A system with a motherboard that has a Serial ATA connector on it, or a Serial ATA host adapter and available PCI slot in which to install the adapter. navigate here If the drive still isn’t showing up and all the connections are secure, try plugging the SATA data cable into a different port on the motherboard.

Not all laptop hard drives are secured by screws. 5 Pull the ribbon to release the hard drive. Wird geladen... Since the operating system does not require a fresh installation, preparing your drive for use is easier. Read on after the jump to learn how to install SATA hard drives and optical (CD/DVD) drives.

Your primary (boot) drive should be connected to the lowest SATA port on your motherboard, unless otherwise specified in your motherboard documentation. My computer came with a 500 GB hard drive that has been pretty close to full. SATA cables can be connected in either direction. /images/thumb/6/65/Install-a-Hard-Drive-Step-8-Version-2.jpg/550px-Install-a-Hard-Drive-Step-8-Version-2.jpg /images/thumb/6/65/Install-a-Hard-Drive-Step-8-Version-2.jpg/300px-Install-a-Hard-Drive-Step-8-Version-2.jpg /5/51/Install a Hard Drive Step 8.360p.mp4 If you are connecting your primary hard drive, the SATA cable should be plugged into This makes it easy to add Serial ATA compatibility to your existing system without removing existing Parallel ATA disk drives.  What You Need   A Phillips screwdriver and four 6-32 UNC drive

Once you’ve placed the hard drive in the housing, press it firmly into the connectors. You should make your own independent evaluation before conducting business with any company. ALL RIGHTS RESERVED. You can usually access the BIOS/UEFI by pressing the DEL or F2 keys right after powering up the system.