Installing A Former Slave Drive Help
Partition the new drive so that the first partition is the same as the size of the old C: drive 2. Need more storage space? It includes instructions for both SATA and IDE types. If you're adding an IDE drive as a second drive, you may be able to connect it to the same data cable as your primary IDE drive, or along with an http://secondsolution.net/hard-drive/installing-xp-on-a-slave-drive.php
If you can install your system disk on its own IDE cable, set it to single disk master mode (sometimes achieved by removing the jumper) and install other disks and devices BUY NOW FREE TRIAL PARTITION MANAGER For Business » Partition Master ProfessionalBuyTry Partition Master ServerBuyTry Partition Master UnlimitedBuyTry For Home & Home Office » Partition Master FreeDownload Partition Master ProfessionalBuyTry For Once the drive is in position insert one of the fixing screws halfway in but do not tighten it yet. It is sometimes easier to remove the IDE data cable and the power cable (labeled A and B in fig 1.1) before you remove the fixing screws (see fig 1.1), as
How To Install A Second Hard Drive Windows 10
You might need some changes to start up to insure files are being pulled from "D" vice "C". Click next it's just a summary of what you told it to do. Do not use these instructions to replace a system drive. Turn off the power to the host system before installation.
Advertisement On the motherboard end, the socket looks like this. Put the screws in a safe place so you don't lose them. Before you start Do not drop or bump the drive. Master Slave Hard Drive Jumper Settings This cable has a blue or red line or dotted line on one side of the cable, this indicates Pin 1.
Since most of people are using Windows 2000 or XP, so overleap all the steps in fdisk. The important thing to recognize here is that IDE drives have an illustration of how to set up the drive properly before installation, and you have to read that before installing. And a totally unrelated tip: if your new computer is Windows XP, be sure to know everything about System Restore! Flag Permalink This was helpful (0) Collapse - Re: Install old hard drive as slave drive?
I've decided to transfer the stuff on my old computer that I want to save to my new one. How To Install A Second Sata Hard Drive Do you know how to change the settings to make the old drive a slave (all single drives are 'masters'; second drives are 'slaves'). If only for storage. Some CD/DVD writers work best when they are the master others work fine regardless, always consult the manufacturers instructions that came with your CD/DVD Writer.
How To Install A Second Hard Drive Windows 7
For more information, including step-by-step instructions, see: Install an extra hard disk in your PC and How to install an SSD in your PC Tags: PC Upgrades Share this article Share weblink If the computer does not have an available 3.5-inch Bay, it is required that a mounting bracket be used. If you plan on using another operating such as Linux or Unix, disk partitioning will be performed during the installation process. Your computer doesn’t support SATA and you can’t get PCI-based SATA connectors to recognize the drive. How To Slave A Sata Hard Drive
The PC will determine master/slave status according to the drives' placement on the cable ("master" at the end, "slave" in the middle). SATA cables can only be inserted one way but ensure the cable is fully inserted. Help answer questions Learn more 188 How-To Geek Articles l l How to Remove DRM From iTunes Movies and TV Shows How Do Night Vision Cameras Work? http://secondsolution.net/hard-drive/installing-old-hard-drive-as-a-slave.php Using the screws that came with the drive or computer case, mount the drive. (fig. 5) 11 Connect the cable that you found in step 6 to the hard drive.
Comments How to slave a SATA drive The great thing about PCs is that they're easy to upgrade. Sata Hard Drive Jumper Settings If you can't find one, consult your PC's documentation. Most of my family's computers now have two hard drives and two CD/DVD/players/burners for a lot of flexibility.
In laymens terms it could be slowing down the transfer rate of the newer drive.
Is the full capacity of the hard drive being seen: Verify the BIOS has auto-detected and LBA mode is enabled. Remove the screws (see the diagram on the right) and gently slide the device back out of the drive bay, taking care not to disturb any nearby cables. Get downloadable ebooks for free! How To Connect Two Sata Hard Disk In One Pc Set Up The Drive In Your BIOS If you’re installing a new boot disk, you may need to fiddle around with the boot order.
If it is over 2 or 3 years old, I would be cautious.2. Assign the drive letter. If you already have an optical drive installed then if possible leave a gap in-between it and the new drive. http://secondsolution.net/hard-drive/installing-slave-hard-drive.php Flag Permalink This was helpful (0) Collapse - Thanks, datalookup by grandpaw7 / August 29, 2004 1:06 AM PDT In reply to: Re: Install old hard drive as slave drive?
If it is too slow, it will negate one of the big reasons for buying a new computer - faster computing. If the IDE/EIDE cable is not already connected to the interface card or motherboard, connect that cable now. There are 3 identical looking connectors – one at either end and one in the middle. These are usually how the motherboard connectors are going to look.
Write out a quick table to figure out how it is currently set up, like this: CHANNEL 1, MASTER: CHANNEL 1, SLAVE: CHANNEL 2, MASTER: CHANNEL 2, SLAVE: Probably your hard As for additional storage, it's okay too, just don't keep critical files stored soley on the old drive. Then wipe your 98 HD prior to giving it away. For the location of the jumper selector see the diagram on the left.
With modern SATA, which is a serial bus instead of the older parallel EIDE bus, things are simpler.