Home > Hard Drive > Installing A New Master HD

Installing A New Master HD

Contents

Tell them you support the bipartisan Fair Repair Act, LB 67. Click Start , right-click My Computer, and select Manage. Tell them repair is good for farmers, good for consumers, and good for businesses. You don't need to buy new HDD and clone it if your laptop is not serviceable. 8-) To be honest, I have never seen this type of laptops. this contact form

You can follow him on Twitter or Google+. If your using Windows 9x (why?) then you'll want to check out bootdisk.com and find something that'll cover your needs. can some one please help me. This is VERY time-consuming usually. http://www.makeuseof.com/tag/install-hard-drive-replace/

Install New Hard Drive Windows 10

I had done everything i could think of. Secondary drives should be connected to the next available SATA channel. 9 Connect a PATA (IDE) hard drive to the motherboard. With SATA, all you need is a free SATA port on the motherboard, a spare bay in which to mount your second hard drive, and a SATA cable to connect the And they get to set whatever prices they want.

Get a Phillips screwdriver and a medium flat-blade screwdriver. The Hard Drive only came with a CD, no floppy disk. Setting Jumpers: SATA DrivesGood news! How To Format A New Hard Drive It is installed, partitioned and formatted but when I try to load XP onto it I get a message saying there is no disc.

Reply Robert on October 25, 2008 at 3:50 pm Great Article. How To Install A Second Hard Drive Before you start Do not drop or bump the drive. Bays for internal drives are usually located below the wider, front-accessible bays that house CD or DVD drives. http://www.easeus.com/resource/install-ide-hard-drive.htm Unless you are replacing an old SATA drive and you followed our guide further up this page then you will have to attach the other end of the SATA data cable

BUY NOW FREE TRIAL Partition Master Server Professional server partition software for Windows Server system. What To Do After Installing A New Hard Drive IDE cable (if required). Thanks! All rights reserved unused Download Center| Support| Live Chat| United States| My Account EaseUS STORE Product Family Data Recovery Partition Manager Todo Backup Utilities Top Products Data Recovery Wizard Pro for

How To Install A Second Hard Drive

Carefully detach any cables that are also attached to the front cover.

Iniciar sesión Compartir Más Denunciar ¿Quieres informar del vídeo? Install New Hard Drive Windows 10 If you are adding a new drive, you'll need to format the drive before you can use it. How To Install A New Hard Drive On A Laptop Do I require any jumpers on these drives if I were to hook up 2 SCSI drives together?

If not, refer to the hardware documentation. weblink Inicia sesión para añadir este vídeo a una lista de reproducción. note: HP cannot be held liable for damage resulting from improper installation of software and/or parts, or the installation of parts and/or software that were not supplied by HP. however, when i installed the HDD, the system didn't work? How To Install A New Hard Drive Windows 7

It is sometimes easier to remove the IDE data cable and the power cable (labeled A and B in fig 1.1) before you remove the fixing screws (see fig 1.1), as Here i want to recommend two softwares. Xp. http://secondsolution.net/hard-drive/installing-new-master-hard-drive.php Laptop drives will obviously be smaller, but have the connections have the same appearance.

Windows XP If the disk does not show up in Windows with usable space, use the following steps to format the drive and make it usable: In Windows XP, click Start, How To Install A Hard Drive In A Laptop When inserting the hard drive ensure that the holes line-up correctly so you can insert the fixing screws to hold it in place. However, if you have an older computer you may find this cable is not available.

Do not apply pressure or attach labels to the circuit board or the top cover of the drive.

Assuming you did clone your data from your old drive to your new once, this process should be painless. If so, press in on the tabs that retain the front cover, there should three to four on each side of the cover and gently pull forward. Install this software first. New Hard Drive Not Showing Up If the motherboard has embedded SATA interfaces, you are normally prompted to install any necessary drivers when you first start the system.

If your drives are showing up properly then you did it right. Ensure that none of the cables can come undone by wiggling them a little bit. 11 Close up your computer. You just need a free Molex-style lead (or a Y-splitter). his comment is here About The Author PCMech Staff176 Comments Ryan on July 29, 2007 at 1:33 pm For a step by step installation procedure, it would be nice if it was written in plain

However, the hard drive is one of the most critical components in your system because it stores all of your information. The ribbon cable is usually quite easy to remove. Restart the computer to begin using it. Installing a replacement drive is simply a matter of taking the existing drive out and putting the new drive in its place.

I got warning that it was failing and managed to download onto an external hard drive all my files etc. (just in case). After you have configured the new drive (and reconfigured the old one, if necessary), mount and secure the new drive and connect the data cable to the drive, as shown in EDIT Edit this Article Home » Categories » Computers and Electronics » Hardware » Internal Components » Hard Drives ArticleEditDiscuss Edit ArticlewikiHow to Install a Hard Drive Two Methods:Desktop Hard DriveLaptop Reply Michael Negranol on July 28, 2008 at 11:56 pm A very helpful article, really.

Here are 6+ signs it might be…How to troubleshoot problems with your routerPCMech's Guide to PC MaintenanceHow To Install A Solid State Drive (SSD)SSD Failure: Warnings, troubleshooting and solutionsShare: PreviousChecking For This is my first time to get my hands dirty to install. Once it loads, you should see an "Initialize Disk" wizard pop up. IDE Drives are connected via an IDE cable, which is wide and flat.

After formatting it, use Norton Ghost (or a similar program) to clone your boot drive's contents to the new drive. Insert the side panel and slide it forward. Most cables are keyed to the connector so they only go in one way; if the cable isn't going in, try flipping it over. My next Challange!!!Cheers Tim Reply Donny on January 3, 2009 at 4:19 pm Fantastic article!!